Seasoned Wood

All firewood contains water. Freshly cut wood can be up to 45% water, while well seasoned firewood generally has a 20-25% moisture content. Well seasoned firewood is easier to start, produces more heat, and burns cleaner. The important thing to remember is that the water must be gone before the wood will burn. If your wood is cut 6 months to a year in advance and properly stored, the sun and wind will do the job for free. If you try to burn green wood, the heat produced by combustion must dry the wood before it will burn, using up a large percentage of the available energy in the process. This results in less heat delivered to your home, and literally gallons of acidic water in the form of creosote deposited in your chimney.
Wood is composed of bundles of microscopic tubes that were used to transport water from the roots of the tree to the leaves. These tubes will stay full of water for years even after a tree is dead. This is why it is so important to have your firewood cut to length for 6 months or more before you burn it, it gives this water a chance to evaporate since the tube ends are finally open and the water only has to migrate a foot or two to escape. Splitting the wood helps too by exposing more surface area to the sun and wind, but cutting the wood to shorter lengths is of primary importance.
There are a few things you can look for to see if the wood you intend to purchase is seasoned or not. Well seasoned firewood generally has darkened ends with cracks or splits visible, it is relatively lightweight, and makes a clear "clunk" when two pieces are beat together. Green wood on the other hand is very heavy, the ends look fresher, and it tends to make a dull "thud" when struck. These clues can fool you however, and by far the best way to be sure you have good wood when you need it is to buy your wood the spring before you intend to burn it and store it properly.